Option Specifications of PM 400-48-TRK

 
Automatic Hopper Door Opener
Both bi-fold hopper doors are opened and closed by a single hydraulically operated cylinder.The electric over hydraulic control is mounted on the driver's side of the unit in a position outside the cab that can be operated from the ground.

Remote Controls

A.Powered by electric and air over hydraulic.It is capable to move the vehicle forward/reverse from 0 to 2 mph, climbing a 10% incline and to steer full left/right.

B.It includes both a fail-safe hydraulic and air brake system that will automatically engage when control handle is released.

C.The control panel is placed on a hand-held unit with a minimum line of 8', so the operator can safely move about while vehicle is in motion, and can be connected to either side of the vehicle, along with the controls for the hydraulic and heating panel operation.

D.An emergency stop switch is mounted on each side of the vehicle.

Roller Lift ? Front or Side

A hydraulically operated, made of electrically arc welded structural steel, designed to handle a single drum roller with a maximum operating weight of 1,400 pounds, width 40", length with handle folded of 40".The hydraulic controls are mounted close to the lift.

Spoil Bin

A hydraulic spoil bin of 5/8 cubic yard capacity is mounted under the platform on the passenger side of the vehicle.The electric push-button over hydraulic control for this is mounted in a position close enough to the bin of safe operation.

Material Tanks

A.Water tank is 37 gallon capacity, gravity feed, ball valve and 4' of hose.

B.Rejuvenating tank is 37 gallon capacity with a self-priming hydraulically driven pump 10 gpm at 100 psi, hose running to the back of the Luminous Wall heating panel, quick couplers to attach additional 25' of hose with spraying wand (includes 18 gallon capacity solvent tank and accessories for back wash).

Rejuvenator Hose & Reel

Spring loaded retractable hose reel with 50' of hose and a spray wand.

Drinking Water Container, Rack and Cup Holder

Five gallon water cooler with galvanized steel exterior, stainless steel liner, electrically arc welded rack, and paper cup dispenser.

Tool Box

A steel tool box is mounted under the platform on the driver's side.This box is large enough to hold the necessary asphalt tools and is made with one (1) locking door.

P.T.O.

Chelsea or Spicer matched to the transmission.

Arrow Board

Dietz #7-88000 Lane Changer or equal.

Two Piece Hydraulic Scarifier Rakes

Two piece sectioned to scarify the pavement that has been heated whether it be one zone or entire width.Each section is independently hydraulically operated by the push-button activating electric over hydraulic controls.The scarifying rakes loosen the heated recycled asphalt pavement when the truck is pulled forward, reducing hand raking by 90%.

Strobe Light

Lear-Siegler model 6850 12 volt DC or equal

LPG Fuel Tank

250 Gallon

CNG Fuel Conversion

The Patch Master is designed to operated on CNG which is stored in cylinders specifically designed for such and will hold approximately 6,000 cu. Ft.
 
 

Call Us Toll Free in the USA & Canada: 800-677-9442

Back