Heat
Master Model M-16
[
Home
] [
Up
] [ M-7 ] [
M-14
] [ M-16 ]
Click pictures to view larger
shot
SPECIFICATIONS
Heat Master Model HM-16 TRK
Heating Panel Patented
Thermal Power 100% Radiant "Luminous Wall" L.P.G. fueled.
-
Consisting of two main panels
with instant controllability and even heat from 40,000 to 100,000 BTU's
per sq. ft. area.
-
Two 6' x 16' instant "ON
& OFF" heating panels divided into four zones, individually controlled
to heat in widths in any of the following combinations of 3', 4'3", 4'6",
7'3", 8'6", 8'9", 11'6", 13' or 16'.
-
Heating panels fueled by L.P.G.
having BTU/hr output of:
-
Zones 1 and 5
1,375,000 BTU/hr each
-
Zones 2, 3, 6, and 7
2,255,000 BTU/hr each
-
Zones 4 and 8
2,337,000 BTU/hr each
-
Total BTU/hr output per main
panel 8,222,000 BTU/hr x two = 16,444,000 BTU/hr
-
Heating panels raise/lower 12'.
Four winged heating panels (Zones 1, 4, 5, and 8) hydraulically pivot from
90deg vertical, travel (8'6" wide) to horizontal, working position (16' wide).
-
All piping, ducting, fittings,
and accessories, such as: gas/air mixers, solenoid valves, limiting orifices
valves, blowers, engine, hydraulic cylinders, and filters are installed
to properly insure maximum operating efficiency of the "Luminous Wall"
heating panel system.
-
Air supply is 3,200 CFM engine
drive, low pressure, combustion blower powered by a 75HP Caterpillar or
equivalent diesel engine.
Soaking Pans
-
Attached between the front and
rear "Luminous Wall" heating panels are highly insulated soaking
pans. The soaking pans are 16' square and hydraulically operates
with main heating panels.
Hydraulic System
-
Dual hydraulic system produces
efficient control of all functions.
-
Primary system rated at 12 GPM
@ 1500 PSI.
-
50-gallon hydraulic tanks, suction
and return filtration. Electric solenoid valves give pushbutton control
and adjustable priority flow controls allow varying speed.
Controls
Hydraulic system controlled
by 12-volt electric solenoid valves operated by pushbutton controls, inside
the cab.
Heating panel controls mounted
on same instrument panel as hydraulic controls (pushbuttons).
Heating panel controls are 12-volt
power off with safety-interlocked design.
Each main wall has a master
start / stop switch.
All eight heating zones have
individual "ON & OFF" switches and indicator lights.
-
The control panel is equipped
with the following indicator lights:
-
Eight zone lights Amber
-
Power ON Red
-
Air Pressure Green
-
Safety Light Green
-
In addition to pushbutton master
switch, mounted on control panel, additional heating panel safety switches
are mounted on each side of the unit.
Primary Mover The cab
and chassis used on this model will be as follows:
-
Freightliner Model FL-106 or
equivalent
-
Fifth wheel located at centerline
of tandem 120" C.A.
-
Air Horn
-
Two 45-gallon fuel tank.
-
A/C.
-
AM-FM radio.
-
Two cameras: one monitor for
overview and curbside.
-
Engine, Caterpillar or equivalent,
300 HP @2200 RPM.
-
Transmission, Fuller RT8709B
nine speed with P.T.O. operated hydrostatic low speed control.
-
Brakes full air anti-lock.
-
Travel speed 5 ft./min. to 70
MPH.
-
Front axle 12,000 lbs.
-
Rear axle 40,000 lbs. Tandem.
-
Tires 11R 22.5 x 8.25 16
ply
LPG Tank
-
2000 US gallon tank 1600-gallon
capacity. Equipped for liquid and vapor withdrawal.
Vaporizers
Trailer and Frame
-
All electric arc welded heavy
duty channel steel frame rails and heavy duty cross rails.
-
Trailers designed to support
propane tank, "Luminous Wall" mounts, insulated soaking pan mounts and
all other necessary equipment.
-
Trailer tandem axel is a full
steering, air ride and full air brakes rated at 40,000 pounds capacity.
-
Wheelbase 42'6" overall with
fifth wheel design for 28'8" turning radius and rear wheel steering for
square corner turns.
Total dimensions of HM -
16:
-
Travel width 8'6"
-
Working width up to 16'
-
Length (travel position) 65'
-
Height 10'
Weight:
Note: Weight is approximate
depending on Truck Model and options.
FOR PRICES, CONTACT THERMAL
POWER CORPORATION.
ALL PRICES ARE F.O.B. COCOA,
FLORIDA IN U.S. DOLLARS AND SUBJECT TO CHANGE WITHOUT NOTICE.
THERMAL POWER CORP. IS PROUD
TO BE THE WORLD LEADER IN PAVEMENT RECYCLING MACHINERY AND METHODS, THEREFORE,
RESERVES THE RIGHT TO DESIGN, MATERIAL AND SPECIFICATION CHANGES WITHOUT
NOTICE.
MANUFACTURER'S ORIGINAL WARRANTY
AND CONDITIONS APPLY.
Call Us Toll Free in the
USA & Canada: 800-677-9442