Heating Panel Ð Patented Thermal Power 100% Radiant "Luminous Wal"  L.P.G. fueled.

• Consisting of two main panels with instant controllability and even heat from 40,000 to 100,000 BTU's per sq. ft. area.
• Two 6' x 13' instant "ON & OFF" heating panels divided into four zones, individually controlled to heat in widths with any of the following combinations of 2', 4', 6'. 8', 10', or 13'.
• Heating panels fueled by L.P.G. having BTU/hr output of:
• Zones 1, 4, 5, and 8     1,266,000 BTU/hr each
• Zones 2, 3, 6, and 7     2,134,000 BTU/hr each
• Total BTU/hr output per main panel  6,800,000 BTU/hr x two   =  13,600,000 BTU/hr
• Heating panels raise/lower 12".  Four winged heating panels (Zones 1, 4, 5 and 8) hydraulically pivot from 90deg vertical, travel (8'6" wide) to horizontal, working position (13' wide).
• All piping, ducting, fittings, and accessories, such as: gas/air mixers, solenoid valves, limiting orifices valves, blowers, engine, hydraulic cylinders, and filters are installed to properly insure maximum operating efficiency of the  "Luminous Wall" heating panel system.
• Air supply is 3,200 CFM engine drive, low pressure, combustion blower powered by a 75HP Caterpillar or quivalent diesel engine.

Soaking Pans

• Attached between the front and rear  "Luminous Wall" heating panels are highly insulated soaking pans.  The soaking pans are 13' x 16' and hydraulically operates with main heating panels.

• Dual hydraulic system produces efficient control of all functions.
• Primary system rated at 12 GPM @ 1500 PSI.
• 50-gallon hydraulic tanks, suction and return filtration.  Electric solenoid valves give pushbutton control and adjustable priority flow controls allow varying speed.

• Hydraulic system controlled by 12-volt electric solenoid valves operated by pushbutton controls, inside the cab.
• Heating panel controls mounted on same instrument panel as hydraulic controls (pushbuttons).
• Heating panel controls are 12-volt power off with safety-interlocked design.
• Heating panels have a master start/stop switch.
• In addition to pushbutton master switch, mounted on control panel, additional heating panel safety switches are mounted on each side of the unit.
• All eight heating zones have individual  "ON & OFF" switches and indicator lights.
• The control panel is equipped with the following indicator lights:
• Eight zone lights  Amber
• Power ON   Red
• Air Pressure   Green
• Safety Light   Green

• Freightliner Model M2-100 or equivalent.
• Fifth wheel located at centerline, cab 106Ó C.A.
• Air Horn
• Two 45-gallon fuel tanks.
• A/C.
• AM-FM radio.
• Two cameras: one camera for overview and curbside.
• Engine, Caterpillar or equivalent, 275 HP @2200 RPM.
• Transmission, Fuller RT8709B nine speed with P.T.O. operated hydrostatic low speed control.
• Brakes full air anti-lock.
• Travel speed 5 ft./min. to 70 MPH.
• Front axle 10,000 lbs.
• Rear axle 21,000 lbs.
• Tires 11R 22.5 x 8.25 16 ply

• 1600 US gallon tank 1280-gallon capacity.  Equipped for liquid and vapor withdrawal.

• Two 80 GPH (each)

• All electric arc welded heavy duty channel steel frame rails and heavy duty cross rails.
• Trailers designed to support propane tank,  "Luminous Wall" mounts, auxiliary engine, blower, insulated soaking pan mounts and all other necessary equipment.
• Trailer tandem axel is a full steering for square turns, air ride and full air brakes rated at 40,000 pounds capacity.
• Wheelbase 40' overall with fifth wheel design for 28' 8" turning radius.
• Travel width   8'6"
• Working width  13'
• Length    62 '6"
• Height    10'

• Dry   51,090 lbs.

NOTE: WEIGHT IS APPROXIMATE DEPENDING ON TRUCK MODEL AND OPTIONS.
 

FOR PRICES, CONTACT THERMAL POWER CORPORATION.

ALL PRICES ARE F.O.B. COCOA, FLORIDA IN U.S. DOLLARS AND SUBJECT TO CHANGE WITHOUT NOTICE.

THERMAL POWER CORP. IS PROUD TO BE THE WORLD LEADER IN PAVEMENT RECYCLING MACHINERY AND METHODS.  THEREFORE, RESERVES THE RIGHT TO DESIGN, MATIRIAL, AND/OR SPECIFICATION CHANGES WITHOUT NOTICE.

MANUFACTURER'S ORIGINAL WARRANTY AND CONDITIONS APPLY.